What is RAID Data Recovery Service ?

RAID Data Recovery service is a highly skilled aspect of Data Recovery! The RAID controller of A customer failed in a way that tainted the on disk array settings, rendering the NTFS volumes unreadable after replacing the controller hardware. These volumes included information of some significance and were asked to look into it before sending off the drives. With the usage of an onsite technician, a scratch SCSI drive, an external Universal Serial Bus hard disk drive, and a Knoppix Linux live CD, we had the ability to retrieve all the information from the array. This appeared like enough feat which we're documenting our procedure could be called down the road that was frightening. Hiring the right Raid Recovery Service is the difference between restoring the lost information and losing it forever!

But we'll notice this is only one of several approaches that are potential, and we would rather think about this as a log about this journey to a travel guide. Adapt these findings into your very own situation. With care. Disclaimer - Experts! - that's the capacity to think on your legs a procedure, requiring technical skills, a sense for danger, and nerves of steel. By getting it wrong, your drives can be left in worse shape than it was found by you, including loss of data. At a minimum, you should have substantial Linux experience to even attempt this, even when the underlying information is for a Windows filesystem. The Data Recovery Guide is a leader in RAID 5 Data recovery service!

This isn't a task to learn at work or to just poke at it. We take no responsibility for harm to information caused by the misuse of those notes. When in doubt, find a pro. Target System Configuration - The failed system was a Dell server with a PERC 2 RAID control with Windows Server 2003. The 5 drives in collection were configured as: 2x 36G SCSI drives, RAID 1 configuration, C: drive, NTFS - 2x 36G SCSI drives, RAID 1 configuration, D: drive, NTFS - 1x 36G SCSI drives, RAID 0 configuration, E: drive, NTFS - The key into our simple success was the RAID 1 collection configuration: this is drive mirroring, where each one of the pair comprises a complete copy of the data. Only trust the best when it comes to raid recovery service!

Our suspicion which proved to be right is your RAID configuration was stored in the beginning of every driveway, appearing before the partition table. In this instance, RAID 1 uses two physical drives but has a logical view of the protected information to the OS. When the drive has the appropriate housekeeping info at the beginning, the RAID control will present to that the host computer a view of what the mirror set which excludes the housekeeping info with that the partition table stored at the virtual block.

Nevertheless, if the drive is read by a regular sequence, the raid data recovery service was a success!